Velva Densified Chequerd Ply
Velva Densified Chequerd Plywood
Velva Densified Chequered Floor is manufactured using ecofriendly multiple location plantation timber, under strict quality control with German collaboration. The product provides a friction-resistant, anti-skid chequered surface, which is bonded with superior grade phenolic resin. It does not degrade against wear and tear, warping and twist free. Its protective properties resist attack from termite, fungus, rot and other destructive elements.
KEY FEATURES:
- The plywood has Rose wood finish
- Bonded with high solid content Water proof ( pf) resin
- Anti skid design for more Coefficient of friction
- It can be used for buss/truck flooring, tempo flooring and mezzanine flooring.
Technical Specifications:
S.No. |
TEST |
ISI REQUIREMENT |
Observed Value |
|---|---|---|---|
| 01. | Dimension | Length, Width - + 5 mm Thickness - + 1 mm | Within limits |
| 02. | Squareness | Deviation not more than 1 mm on a length of 500mm | Deviation below 1 mm |
| 03. | General Flatness | Twist, cupping, warping not to exceed 6 mm | |
| 04. | Local Planeness | Depth of deviation at any point to be less than 0.5 mm | Within limits |
| 05. | Impact Indentation Test | Depth of Indentation not to exceed 0.2 mm | Within limits |
| 06. | Edge Loading Test | Deflection of edge with max. To be less than 5 mm | Within limits |
| 07. | Shock Resistance Test | No visible defect after test | No visible defects |
| 08. | Buckling Test | Initial deflection - < 50 mm residual deflection - < 5 mm | Within limits |
| 09. | Slamming Test | No visible damage after Test | No visible damage |
| 10. | Misuse Test | No deformation after Test | No deformation |
| 11. | Varying Humidity Test | No visible warping, twisting or de-lamination | No such defects observed |
| 12. | End Immersion Test | No de-lemination at the end | No de-lemination |
| 13. | Knife Test | Minimum Pass Standard | Excellent |
| 14. | Glue Adhesion Test | No de-lamination | No de-lamination |
| 15. | Screw Withdraw Test | Load to withdraw screw to be more than 1000 N | Load - > 1000 N |
